Installation

SUPPLEMENTAL RESTRAINT SYSTEM: DRIVER SIDE KNEE AIRBAG ASSEMBLY: INSTALLATION

1. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY

(a) Connect the connector.





NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Install the driver side knee airbag assembly with the 4 bolts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

2. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY Installation

3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

4. INSTALL INSTRUMENT SIDE PANEL LH Installation

5. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation

6. INSTALL CONSOLE UPPER PANEL ASSEMBLY Installation

7. INSTALL FRONT CONSOLE UPPER PANEL GARNISH Removal

8. INSTALL FRONT DOOR OPENING TRIM COVER LH Installation

9. INSTALL FRONT DOOR SCUFF PLATE LH Installation

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

11. PERFORM INITIALIZATION

12. INSPECT SRS WARNING LIGHT