Installation

CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): INSTALLATION

1. INSTALL DCM (TELEMATICS TRANSCEIVER)

2. INSTALL NO. 1 TELEPHONE BRACKET

(a) Install the No. 1 telephone bracket with the screw.





3. INSTALL NO. 2 TELEPHONE BRACKET

(a) Install the No. 2 telephone bracket with the 2 screws.





4. INSTALL DCM (TELEMATICS TRANSCEIVER) WITH BRACKET

(a) Install the DCM (telematics transceiver) with bracket with the 3 bolts.





Torque : 3.0 Nm (30 kgf-cm, 27 in-lbf)

(b) Connect each connector.

5. INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY Installation

6. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation

7. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

8. INSTALL INSTRUMENT SIDE PANEL RH Installation

9. INSTALL FRONT DOOR OPENING TRIM COVER RH

HINT
Use the same procedure for the RH side and LH side Installation.

10. INSTALL FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and LH side Installation.

11. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation

12. INSTALL CONSOLE UPPER PANEL SUB-ASSEMBLY Installation

13. INSTALL FRONT CONSOLE UPPER PANEL GARNISH Installation

14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

15. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.

16. DCM ACTIVATION

HINT
When replacing the DCM (telematics transceiver), perform vehicle contract setting DCM Activation.