Removal

HYBRID / BATTERY CONTROL: BATTERY BLOWER: REMOVAL

1. REMOVE REAR NO. 2 FLOOR BOARD Removal

2. REMOVE REAR DECK FLOOR BOX Removal

3. REMOVE REAR NO. 3 FLOOR BOARD Removal

4. REMOVE DECK FLOOR BOX RH Removal

5. REMOVE REAR NO. 4 FLOOR BOARD (w/o Woofer) Removal

6. REMOVE REAR NO. 4 FLOOR BOARD (w/ Woofer) Removal

7. REMOVE DECK FLOOR BOX LH (w/o Woofer) Removal

8. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) Removal

9. REMOVE REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY Removal

10. REMOVE REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY Removal

11. REMOVE REAR NO. 1 FLOOR BOARD Removal

12. REMOVE REAR SEATBACK ASSEMBLY RH

Removal

13. REMOVE REAR DOOR SCUFF PLATE RH

HINT
Use the same procedure as for the LH side Removal.

14. REMOVE REAR SEAT SIDE GARNISH RH

HINT
Use the same procedure as for the LH side Removal.

15. REMOVE REAR FLOOR BOARD SPACER Removal

16. REMOVE NO. 1 HYBRID BATTERY INTAKE DUCT Removal

17. REMOVE BATTERY COOLING BLOWER ASSEMBLY

NOTICE:
* Be sure not to touch the fan part of the battery cooling blower assembly.
* Do not lift the battery cooling blower assembly using the wire harness.

(a) Disconnect the 2 wire harness clamps.

(b) Disconnect the battery cooling blower assembly connector and clamp.