Removal
SEAT BELT: REAR SEAT INNER BELT ASSEMBLY: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment Service Precautions.
2. REMOVE REAR SEAT CUSHION ASSEMBLY Removal
3. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH
(a) Remove the bolt and the rear seat inner with center belt assembly LH.
4. REMOVE REAR SEAT HEADREST ASSEMBLY
5. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY
6. REMOVE REAR SEATBACK ASSEMBLY Removal
7. REMOVE REAR DOOR SCUFF PLATE LH Removal
8. REMOVE REAR DOOR SCUFF PLATE RH Removal
9. REMOVE REAR SEAT SIDE AIRBAG ASSEMBLY LH Removal
10. REMOVE REAR SEAT SIDE AIRBAG ASSEMBLY RH
HINT
Use the same procedure for the RH side and LH side.
11. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH Removal
12. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH Removal
13. DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH
(a) Remove the bolt and disconnect the floor end of the rear seat 3 point type belt assembly LH.
14. DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH
HINT
Use the same procedure for the RH side and LH side.
15. DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH
(a) Remove the bolt and disconnect the floor end of the rear seat inner with center belt assembly RH.
16. REMOVE REAR SEAT SHOULDER BELT HOLE COVER
(a) Disengage the 4 claws and remove the rear seat shoulder belt hole cover.
HINT
Use the same procedure for the other 2 rear seat shoulder belt hole covers.
17. REMOVE CENTER STOP LIGHT SET (w/o Rear Sunshade) Removal
18. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)
(a) Disengage the 2 clips.
(b) Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly.
(c) Disengage the 6 claws and remove the package tray trim panel assembly.
19. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade) Removal
20. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH
(a) Remove the bolt and the rear seat inner with center belt assembly RH.
