Removal

3UZ-FE COOLING: RADIATOR: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE ENGINE UNDER COVER
3. DRAIN ENGINE COOLANT Service and Repair
4. REMOVE NO. 1 AIR CLEANER INLET Removal
5. REMOVE RADIATOR RESERVE TANK ASSEMBLY Removal
6. REMOVE V-BANK COVER Removal
7. REMOVE INTAKE AIR CONNECTOR PIPE Removal
8. REMOVE AIR CLEANER ASSEMBLY Removal
9. DISCONNECT NO. 1 RADIATOR HOSE





(a) Disconnect the radiator hose.
10. DISCONNECT NO. 2 RADIATOR HOSE





(a) Disconnect the radiator hose.
11. DISCONNECT NO. 1 OIL COOLER INLET TUBE





(a) Disconnect the inlet tube from the radiator.
12. DISCONNECT NO. 1 OIL COOLER OUTLET TUBE





(a) Disconnect the outlet tube from the radiator.
13. REMOVE RADIATOR ASSEMBLY





(a) Remove the outlet duct.
(b) Disconnect the cooling fan ECU connector.





(c) Remove the 2 nuts and 2 radiator support brackets.
(d) Remove the radiator.
(e) Remove the 2 grommets.
14. REMOVE FAN SHROUD SUB-ASSEMBLY Removal