Removal

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER AIRBAG ASSEMBLY: REMOVAL

1. DISCONNECT BATTERY NEGATIVE TERMINAL
NOTICE:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

2. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
Removal
HINT:
Refer to the procedures up to "REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY".

3. REMOVE SIDE DEFROSTER NOZZLE NO.1 DUCT Disassembly

4. REMOVE HEATER TO REGISTER NO.1 DUCT Disassembly

5. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY






(a) Disconnect the 2 connectors and remove the instrument panel wire assembly from the front passenger airbag assembly.
NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.





(b) Remove the 2 screws.






(c) Disengage the 5 hooks (A).
(d) Disengage the 5 hooks (B) and remove the front passenger airbag assembly from the instrument panel.