Disassembly

INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD: DISASSEMBLY

1. REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT

(a) Remove the screw and duct.
2. REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT

(a) Remove the screw and duct.
3. REMOVE DEFROSTER NOZZLE ASSEMBLY

(a) Remove the 3 screws and nozzle.
4. REMOVE NO. 3 HEATER TO REGISTER DUCT

(a) Remove the 3 screws and duct.
5. REMOVE NO. 1 HEATER TO REGISTER DUCT

(a) Remove the 3 screws and duct.
6. REMOVE NO. 2 HEATER TO REGISTER DUCT

(a) Remove the 4 screws and duct.
7. REMOVE INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY

(a) Using a screwdriver, detach the 4 claws.
HINT:
Tape the screwdriver tip before use.

(b) Using a screwdriver, detach the 6 clips and remove the register.
HINT:
Tape the screwdriver tip before use.

8. REMOVE INSTRUMENT PANEL NO. 3 REGISTER ASSEMBLY

(a) Using a screwdriver, detach the 2 claws.
HINT:
Tape the screwdriver tip before use.

(b) Using a screwdriver, detach the 6 claws and remove the register.
HINT:
Tape the screwdriver tip before use.

9. REMOVE INSTRUMENT PANEL NO. 1 REGISTER ASSEMBLY

(a) Using a screwdriver, detach the 6 claws and remove the register.
HINT:
Tape the screwdriver tip before use.

10. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY Removal

11. REMOVE INSTRUMENT PANEL NO. 2 SPEAKER PANEL SUB-ASSEMBLY

(a) Using a screwdriver, detach the 2 clips and 2 claws.
HINT:
Tape the screwdriver tip before use.

(b) Remove the speaker panel.
12. REMOVE INSTRUMENT PANEL NO. 1 SPEAKER PANEL SUB-ASSEMBLY

(a) Using a screwdriver, detach the 2 clips and 2 claws.
HINT:
Tape the screwdriver tip before use.

(b) Remove the speaker panel.
13. REMOVE NO. 1 SPEAKER HOLE COVER

(a) Using a screwdriver, detach the 4 clips and remove the speaker panel.
HINT:
Tape the screwdriver tip before use.

14. REMOVE FRONT NO. 2 SPEAKER RH Removal

15. REMOVE FRONT NO. 2 SPEAKER LH Removal

16. REMOVE FRONT STEREO COMPONENT SPEAKER Removal

17. REMOVE ENGINE SWITCH
(a) Remove the engine switch.
for 2GR-FSE Removal
for 1UR-FSE Removal