B4 Check Harness +VE Continuity

B4 CHECK HARNESS +VE CONTINUITY





1. Turn the ignition switch to the OFF position.
2. Disconnect the harness connector.
3. With EM007 and EM046 disconnected, measure the resistance between EM046/016 and EM007/053
- Is the resistance less than 0.5 ohms ?
Yes --> GO to [B5] B5 Check Harness +VE Continuity
No --> Inspect EM007 and EM046 for corrosion, bent/pushed back pins or locate & repair the harness. Test the system for normal operation.