B5 Check Harness +VE Continuity

B5 CHECK HARNESS +VE CONTINUITY





1. Turn the ignition switch to the OFF position.
2. Disconnect the harness connector.
3. With EM007 and EM046 disconnected, measure the resistance between EM046/012 and EM007/052.
- Is the resistance greater than 0.5 ohms?
Yes --> GO to [B6] B6 Check For Short to B+
No --> Inspect EM007 and EM046 for corrosion, bent/pushed back pins or locate and repair the harness. Test the system for normal operation