Removal And Installation

WASHER TANK

Removal and Installation


REMOVAL






1.Remove washer tank inlet fixing clip (A).
2.Pull out washer tank inlet (1) from washer tank.





3.Remove front bumper fascia and bumper reinforcement. Removal And Installation.
4.Remove fender protector RH (front). Removal And Installation.
5.Disconnect washer pump connector.
6.Disconnect front washer tube.
7.Remove washer tank mounting bolts.
8.Remove washer tank from the vehicle.

INSTALLATION

Note the following item, and then install in the reverse order of removal.

CAUTION:
Add water up to the top of the washer tank inlet after installation. Check that there is no leakage.