Removal And Installation

FENDER PROTECTOR

FENDER PROTECTOR : Removal and Installation


REMOVAL

1.Remove fender protector (rear) rear end fixing screw.
2.Remove fender protector (rear) fixing clips.
3.Remove fender clip from wheelhouse arches, and then remove fender protector (rear) from wheel house.





4.Remove bolts (A) of fender protector (front) located engine under cover and front bumper fascia.
5.Remove fender protector (front) fixing clips.
6.Remove fender clip from wheelhouse arches, and then remove fender protector (front) from wheel house.
7.Remove the following parts after removing fender protector.
- Air guide
- Fender clips

INSTALLATION

Install in the reverse order of removal.