Dash Side Finisher

BODY SIDE TRIM

DASH SIDE FINISHER : Removal and Installation


CAUTION:
- When removing, always use a remover tool that is made of plastic.
- Never damage the body.

DRIVER SIDE (DASH SIDE FINISHER LH)

Removal
1.Remove front kicking plate inner LH. Kicking Plate Inner.





2.Remove clip (A).
3.Insert remover tool (B) between dash side finisher (1) and body side panel to disengage clips.





4.Pull back dash side finisher LH to remove.
Installation
Note the following item, and then install in the reverse order of removal.

CAUTION:
When installing, check that all clips are securely fitted in panel holes on body, and then press clips in.

PASSENGER SIDE (DASH SIDE FINISHER RH)

Removal
1.Remove front kicking plate inner RH. Kicking Plate Inner.
2.Remove instrument lower cover. Removal And Installation.





3.Insert remover tool (A) between dash side finisher RH (1) and body side panel to disengage clips.





4.Pull back dash side finisher RH to remove.
Installation
Note the following item, and install in the reverse order of removal.

CAUTION:
When installing, check that all clips are securely fitted in panel holes on body, and then press clips in.