Kicking Plate Inner

BODY SIDE TRIM

KICKING PLATE INNER : Removal and Installation


CAUTION:
- When removing, always use a remover tool that is made of plastic.
- Never damage the body.

REMOVAL

FRONT KICKING PLATE INNER
1.Insert a remover tool between front kicking plate inner and body side panel to disengage metal clip on the front side.
2.Pull up front kicking plate inner starting from rear side to disengage pawls.










REAR KICKING PLATE INNER





1.Insert a remover tool between rear kicking plate inner and body side panel, and disengage clip and pawls.
2.Move rear kicking plate inner back and forth to disengage metal clip.






INSTALLATION

Note the following items, and then install in the reverse order of removal.

CAUTION:
- Check that watertight packing is attached to clip.
- When installing, check that all clips, pawls, and metal clips are securely fitted in panel holes on body, and then press clips, pawls, and metal clips in.