Trunk Finisher Front

TRUNK ROOM TRIM


TRUNK FINISHER FRONT : Removal and Installation


REMOVAL
1. Fully open trunk lid assembly.
2. Remove trunk room lamp (luggage side). Removal And Installation.
3. Remove trunk floor carpet.
4. Remove trunk lid weather-strip. .
5. Remove trunk front finisher fixing clips.
6. Insert a remover tool between the rear seatback center finisher and trunk front finisher to disengage the metal clips.
7. Pull down trunk front finisher, and disengage dual-lock fasteners.
8. Remove trunk front finisher from the vehicle.

INSTALLATION
Note the following item, and then install in the reverse order of removal.

CAUTION:
Check that metal clips are securely fitted in panel holes on body when installing, and then metal clips in.