Rear Propeller Shaft 3S80A

REAR PROPELLER SHAFT


Inspection


APPEARANCE
- Check propeller shaft for bend and damage. If damage is detected, replace propeller shaft assembly.

PROPELLER SHAFT RUNOUT
- Check propeller shaft runout at measuring points. If runout exceeds specifications, replace propeller shaft assembly. For measuring point, refer to Rear Propeller Shaft 3S80A.






Limit
Propeller shaft runout
: Refer to "Propeller Shaft Runout".
Propeller Shaft Runout


JOURNAL AXIAL PLAY
- As shown in the figure, while fixing yoke on one side, check axial play of joint. If outside the standard, replace propeller shaft assembly.






Standard
Journal axial play
: Refer to "Journal Axial Play".
General Specifications


CAUTION:
Never disassemble joints.

CENTER BEARING
- Check center bearing for noise and damage. If noise or damage is detected, replace propeller shaft assembly.

CAUTION:
Never disassemble center bearing.