B2516

B2516 SHIFT SIGNAL [P, R]





Description
AFS control unit receives the shift position signal from TCM with CAN communication.




DTC Logic

DTC DETECTION LOGIC
[B2516] Shift signal [P, R]






DTC CONFIRMATION PROCEDURE
1.DTC ERASE
Erase the DTC memory of AFS with CONSULT-III.
- GO TO 2.
2.DTC CONFIRMATION
1. Turn the ignition ON.
2. Select the self-diagnosis with CONSULT-III.
Is DTC "B2516" detected?
YES - Refer to B2516.
NO - Refer to Intermittent Incident.




Diagnosis Procedure
1.TCM SELF-DIAGNOSIS
Check the self-diagnosis result with CONSULT-III. Check that TCM does not detect any DTCs.
Is any DTC detected?
YES - Check TCM. Refer to Testing and Inspection.
NO - GO TO 2.
2.DTC ERASE
Erase the DTC memory of AFS with CONSULT-III.
Is the memory erased?
YES - INSPECTION END
NO - Replace AFS control unit.