Window Glass - Rear Quarter, Convertible

Window Glass - Rear Quarter, Convertible









Removal

NOTE: The rear quarter glass seal (division bar) is bonded to the glass and cannot be serviced separately.

1. Remove the rear quarter trim panel.

2. Remove the 2 rear quarter glass bolts and the rear quarter window glass.

Installation

1. Install the rear quarter window glass and finger-tighten the 2 bolts.

2. NOTE: If installing a new rear quarter glass due to a torn/separating quarter glass seal (division bar), make sure the front door glass is adjusted correctly. For additional information, refer to Window Glass Adjustment - Front Door Adjustments.

Adjust the rear quarter window glass. For additional information, refer to Window Glass Adjustment - Rear Quarter, Convertible Adjustments.