Verification Test VER-1A - No Start Verification Test

NO START VERIFICATION

1. Inspect the vehicle for loose, missing, or damaged vacuum lines and/or electrical wires/connections. Repair as necessary.

2. Inspect the engine for contamination. If it is contaminated, change the oil and filter.


3. Attempt to start the engine.


4. If the engine is unable to start, look for any applicable TSB's relating to this condition. Return to TEST TC-1A if necessary. TC-1A CODE TO TC TEST CHART (Checking For Trouble Codes)

5. The repair is now complete. Return to TEST TC-1A. TC-1A CODE TO TC TEST CHART (Checking For Trouble Codes)