Underhood Lamp - Installation

LAMP





1. Position the underhood lamp and bracket (4) to the inner hood reinforcement (2) as a unit. Be certain that the locating tab on the bracket is engaged into the locating hole in the inner hood reinforcement.
2. Install the plastic push-in retainer (5) to secure the underhood lamp mounting bracket to the inner hood reinforcement.
3. Reinstall the bulb into the underhood lamp. Underhood Lamp - Installation.
4. Reconnect the underhood jumper wire harness connector (3) to the underhood lamp connector receptacle.
5. Reinstall the removed push-in retainers that secure the hood silencer pad (1) to the inner hood reinforcement.
6. Reconnect the battery negative cable.