Steering Column Opening Cover - Installation

INSTALLATION





1. Position the front left side of the steering column cover up inside the cowl kick panel. Pivot it up and firmly snap into place.
2. Install the two screws in the knee blocker airbag cut out.
3. Install the three screws on the side instrument panel, under where the end cap would be when installed.
4. Install the instrument panel end cap Instrument Panel End Cap - Installation.
5. Install the knee blocker airbag (if equipped) Knee Blocker Airbag - Installation.

WARNING: Do not connect the battery negative cable. Serious or fatal injury may result if the system test is not performed first.