Headliner - Installation

INSTALLATION






CAUTION: Cover the floor of vehicle with a dirt free protective sheet of paper or plastic to prevent dirt from soiling headliner.

CAUTION: Use clean gloves or ensure hands are clean before removing.

1. With the help of an assistant, guide headliner rearward through passenger door fabric side facing driver door while minimizing contact to the door opening.
2. Through glove box opening, install terminals into headliner connector (1).





3. Connect headliner connector along A-pillar to connector.





4. Slowly raise headliner (2).





5. If equipped with sunroof, ensure headliner (2) seats to sunroof opening (1).
6. Install rear push pins (3).





7. If equipped, connect sunroof connector (2) if equipped.
8. Install sun visor supports.Visor - Installation
9. Install sun visors. Visor - Installation
10. Install front and rear assist handles and coat hooks if equipped.
11. Install dome lamp.
12. Install glove box. Instrument Panel Glove Box - Installation
13. Install reading lamp.Reading Lamp - Installation
14. Install center console. Shifter Housing - Installation
15. Install A-pillar trim. A-Pillar Trim Panel - Installation
16. Install B-pillar trim.B-Pillar Trim Panel - Installation
17. Install C-pillar trim.C-Pillar Trim Panel - Installation
18. Install door sill trim panel. Scuff Plate - Installation
19. Install front driver/passenger seat and rear cushion. Seat - Installation and Seat Cushion Cover - Installation.