Shifter Housing - Installation

INSTALLATION

AVENGER





1. If equipped, connect center console housing wire connector (5) with instrument panel connector (1).
2. Place console housing (7) over shifter lever (3) ensuring console tabs seat properly.
3. Install four screws (9) in the console compartment.
4. Install two screws (8) in the front of the console.
5. Install console bezel Center Console Bezel - Installation.
6. Replace shift bezel and knob Shifter Bezel - Installation.

SEBRING





1. If equipped, connect center console housing wire connector (2) with instrument panel connector.
2. Place console housing (6) over shifter lever ensuring console tabs seat properly.





3. Install screws (6).
4. Install screws (5)





5. Install console bezel (1).Instrument Panel Bezel - Installation
6. Replace shift bezel and knob. Shifter Bezel - Installation Shifter Bezel - Installation.