Removing and Installing Complete Night Vision Camera

66 54 010 - Removing and installing complete night vision camera (from build date 09/07)





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Remove front bumper trim 51 11 156 Removing and Installing Front Bumper Trim





Release screw (1) and disconnect plug connection (2).
Tightening torque 66 54 1AZ [1][2]Forward Looking Camera.





Important!
Secure night vision camera (3) against falling down.

Release screws (1).

Disconnect hose (2) and remove night vision camera (3).
Tightening torque 66 54 1AZ [1][2]Forward Looking Camera.





After installation:
- Fill up with washer fluid
Replacement only:
- Replace night vision camera Replacing Night Vision Camera