Removing and Installing/Replacing All Rear Seat Belts

72 11 102 - Removing and installing/replacing all rear seat belts





Necessary preliminary tasks:
- Remove panel for rear window shelf 51 46 006 - Removing and installing/replacing trim for rear parcel shelf
- Remove rear seat Rear Seat - Normal





Removing left and right inertia reel units:
Release screw (1) on left and right inertia reel units (2).
Tightening torques 72 11 20AZ [1][2]Seat Belt Systems.
Remove left and right inertia reel units (2).
Removing middle inertia reel unit:
Unscrew bolt (3).
Tightening torques 72 11 20AZ [1][2]Seat Belt Systems.
Remove inertia reel unit (4).

Installation:
Guide lug of inertia reel unit (4) must be correctly seated in opening in body.





Installation:
Pay attention to coding on inertia reel unit (1) and on body (2).





Release screws (2) on left and right.
Tightening torques 72 11 22AZ [1][2]Seat Belt Systems.
Remove left and right seat belts (1).

Installation:
Secure fittings of left and right seat belts (1) through guides (2) and stop (3).





Removing lower strap receptacles:
Release screws (1).
Tightening torque 72 11 23AZ [1][2]Seat Belt Systems.
Remove lower strap receptacles (2).
Remove middle upper strap (3).





Installation:
Ensure correct installation sequence and installation position:
- Fittings of center lower strap/center upper strap must rest on stop (1).
- Secure lower strap on left and right through guides (2).