Ribbed Belt Drive, Vehicles With Electro-Mechanical Power Steering Overview

Ribbed Belt Drive, Vehicles with Electro-Mechanical Power Steering Overview






1 Ribbed Belt

• Check for wear

• Before removing, mark direction of rotation using chalk or felt-tip marker

• Removing and installing, refer to => [ Ribbed Belt, Vehicles with Electro-Mechanical Power Steering ] Ribbed Belt, Vehicles With Electro-Mechanical Power Steering

• Do not kink

• When installing, make sure it is seated correctly on the ribbed belt pulleys

2 Generator

3 Bolt

4 Idler Roller

• 40 Nm

• For the ribbed belt

5 Bolt

• Tightening specification - item 2 - => [ (Item 2) Bolt ] Coolant Pump, Coolant Thermostat and Connecting Piece Overview

6 Ribbed Belt Pulley

• For coolant pump

• Removing and installing, refer to => [ Coolant Pump ] Coolant Pump

7 Bolt

• Tightening specification - item 1 - => [ (Item 1) Bolt ] Coolant Pump, Coolant Thermostat and Connecting Piece Overview

8 Coolant Pump

• Removing and installing, refer to => [ Coolant Pump ] Coolant Pump

9 Tensioning Element

• 40 Nm

• For the ribbed belt

• Removing and installing, refer to => [ Ribbed Belt Tensioning Damper, Vehicles with Electro-Mechanical Power Steering ] Ribbed Belt Tensioning Damper, Vehicles With Electro-Mechanical Power Steering

10 Vibration Damper

• With ribbed belt pulley

• Installation is only possible in one position because of the offset holes

• Removing and installing, refer to => [ Vibration Damper ] Service and Repair

11 Bracket

• For Air Conditioning (A/C) compressor

12 Bolt

13 Bolt

14 A/C Compressor

• Do not unfasten/separate refrigerant lines

15 Alignment Bushing

• Quantity: 2

16 Bolt

• Tightening specification - item 2 - => [ (Item 2) Bolt ] Ribbed Belt Drive, Vehicles With Hydraulic Power Steering Overview