Left Exhaust Manifold

Left Exhaust Manifold

Removing






• When installing, bring all cable ties back to the same positions.

- Remove the left catalytic converter. Refer to => [ Left Catalytic Converter ] Left Catalytic Converter

- Remove the front noise insulation - 1 -..

- Remove the Heated Oxygen Sensor (HO2S) 2 (G108) - 1 -.






- Remove the bolts - 1 through 4 - and remove the heat shield.






- Remove the nuts - 1 - and - 8 - and the heat shield bracket.






- Remove nuts - 2 through 7 - and - 9 - and remove the exhaust manifold.

Installing

Install in reverse order, paying attention to the following:

Tightening specifications, refer to:

• => [ Left Exhaust Manifold, Tightening Specifications and Sequence ] Exhaust Manifold Overview

• => [ Exhaust Manifold Overview ] Exhaust Manifold Overview

• Replace seal and nuts.

• Coat the thread on the nut with hot bolt paste; for the correct hot bolt paste, refer to the Parts Catalog.

- Position the exhaust manifold with the catalytic converter seal and tighten the nuts. Refer to => [ Left Exhaust Manifold, Tightening Specifications and Sequence ] Exhaust Manifold Overview.






- Install the HO2S 2.

- Install the left catalytic converter. Refer to => [ Left Catalytic Converter ] Left Catalytic Converter.

- Install the noise insulation..