Selector Lever

Selector Lever

Special tools, testers and auxiliary items required

• Pry Lever - Rmv Outside Mirror (80 - 200)

Removing






- Remove the rear noise insulation - 2 -..

- Remove the selector lever cable heat shield bolts - 1, 3 and 4 -.






• Ignore - 2 -.

- Move the heat shield to the side.

- Remove ball head - 1 - on the selector lever cable from the selector shaft lever using the (80 - 200).






• Ignore - 2 -.

- Remove the nut - 3 - hand remove the washer - 4 - and selector lever - 2 - from the selector shaft - 1 -.






Installing

Tightening specifications:

• => [ Selector Lever and Multifunction Transmission Range Switch (F125) Overview ] Description and Operation

• => [ Selector Lever Cable Heat Shield - Tightening Specification ] Description and Operation








Danger of causing damage to the transmission selector lever.

• Do not bend the transmission selector lever when installing the selector lever cable. Control it if necessary.

- Press the selector lever cable - 1 - carefully onto the selector lever.

• Ignore - 2 -.

Install in reverse order of removal. Note the following:

- Install the rear noise insulation..