Outer 2nd Row Three-Point Seat Belt Assembly Overview

Outer 2nd Row Three-Point Seat Belt Assembly Overview

Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components, Safety Precautions and General Information ] Restraint System Components, Safety Precautions and General Information.






1 Bolt

• 55 Nm

• If three-point seat belt is being removed for accident repairs, replace screw

2 Belt anchor

• The anchor depression - arrow A - must rest on the anti-twist mechanism - arrow B -

3 Bolt

• 55 Nm

• in delivery casing

• If 2nd row outer three-point seat belt is being removed for accident repairs, replace screw

4 Belt roller/belt tensioner

• Removing and Installing, refer to => [ Outer 2nd Row Three-Point Seat Belt ] Outer 2nd Row Three-Point Seat Belt

• Belt tensioner is not present on all vehicles.

5 Belt tensioner connector

• Removing and installing => [ Outer 2nd Row Three-Point Seat Belt ] Outer 2nd Row Three-Point Seat Belt

6 Belt webbing

7 Belt guide

• Removing and Installing, refer to => [ Rear belt Guide, 2nd Row ] Rear Belt Guide, 2nd Row

8 Belt height adjustment

• Removing and Installing, refer to => [ Rear Belt Height Adjuster, 2nd Row ] Rear Belt Height Adjuster, 2nd Row

• Function test => [ When checking function, following conditions must be fulfilled: ] Front Seat Belt Height Adjuster

• Seat belt height adjuster must always be replaced if the belt tensioner has deployed with the belt on

9 Bolt

• 21 Nm

• If the seat belt height adjuster is being removed for accident repairs, replace the screw

10 Belt relay

• Belt relay must swing by itself in carrier direction after tightening screw.

11 Bolt

• 55 Nm

• If belt relay is being removed for accident repairs, replace screw

• Belt relay must swing by itself in carrier direction after tightening screw.

12 C-pillar trim

13 Belt height adjustment slide