Upper and Lower Parts Of Front Center Armrest Support Foot

Upper and Lower Parts of Front Center Armrest Support Foot

Special tools, testers and auxiliary items required

• Pry lever (80-200)






Removing






- Remove center console. Refer to => [ Center Console ] Center Console.

- Remove screws - arrows - and remove upper part of front center armrest support foot.

- Disconnect electrical harness connectors - 1 -.






- Press electrical wiring harness off of bracket with Pry Lever (80-200) - arrows -.

• For easier removal of wiring clips, use silicon-free lubricating spray if necessary.

- Remove screws - 3 - and - 4 - and remove air duct - 2 - with the positioning motors.

- Remove screws - arrows - and remove lower part of front center armrest support foot.






Installation

Install in reverse order of removal.

• For the correct tightening specifications; refer to => [ Front Center Armrest Assembly Overview ] Front Center Armrest With Foldable Padding.