Shift Cable: Description and Operation

Selector Lever Cable Overview






1 Clip

• Replace

• For selector lever cable

2 Bolt

• 8 Nm

• Quantity: 2

3 Selector Lever Cable

• Do not bend

• Removing and installing, refer to => [ Selector Lever Cable ] Service and Repair

• The selector lever cable must be replaced if the rubber grommet is damaged.

• Lightly lubricate ball socket with polycarbamide grease (G 052 142 A2) before installing.

• Make sure the rubber grommet on the transmission side is not twisted when installing.

• Adjusting, refer to => [ Selector Lever Cable, Adjusting ] 0BKA Automatic Transmission

• => [ Selector Lever Cable, Bringing into Basic Setting ] 0BKA Transmission

4 Cable Mounting Bracket

5 Bolt

• 13 Nm

• For selector lever cable adjustment

• Secured on the shift mechanism function unit

6 O-ring

• Replace

7 Gearshift Lever

Heat Shield - Tightening Specification





• Bolts - upper arrows -: 9 Nm.

• Bolt - lower arrow -: 20 Nm.