Left Charge Air Cooling Circuit Radiator

Left Charge Air Cooling Circuit Radiator

Special tools, testers and auxiliary items required

• Hose Clamps Up to 25 mm Dia. (3094)

• Drip Tray (VAS 6208)

• Hose Clip Pliers (VAS 6362)

Removing

- Remove the front noise insulation - 1 -.






- Remove the left front wheel spoiler - 2 -.






- Remove the bumper cover end plate - 3 -.






• The bumper is not shown in the following illustrations.

- Remove the air duct - 1 - - arrow -.






- Place the (VAS 6208) under the left front charge air cooling circuit radiator.






- Disconnect and remove the coolant hoses and the (3094) , to do this, loosen the hose clamps - arrows -.

- Remove the bolts - 2 -.

- Remove the left charge air cooling circuit radiator - 1 - upward from the bracket.

Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to => [ Radiator Overview ] Radiator Overview.

• Secure all hose connections with hose clamps appropriate for the model, refer to the Parts Catalog.

- Remove the bumper cover end plate.

- Install the left front wheel spoiler and noise insulation.

- Fill with coolant => [ Filling ] Service and Repair.

• All of the coolant must be changed if the radiator was replaced.