Diagram 3/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine coolant level sensor, Vehicle electrical system control module, Engine control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E45 - Cruise control switch

G32 - Engine coolant level sensor

J217 - Transmission control module Locations Locations

J393 - Comfort system central control module Locations

J519 - Vehicle electrical system control module Locations

J527 - Steering column electronics control module Locations

J623 - Engine control module Locations

T2bg - Double connector

T17a - 17-pin connector, Left plenum chamber E-box connector station Locations

T17b - 17-pin connector, Left plenum chamber E-box connector station Locations

T17i - 17-pin connector, in the left A-pillar connector station Locations

T32a - 32-pin connector Vehicle Electrical System Control Module -J519-

T32g - 32-pin connector Locations

T94 - 94-pin connector Locations

(410) - Sensor ground connection 1 (in main wiring harness)

(E26) - Selector lever P/N position connection (in Motronic multiform fuel injection wiring harness)

* - Only for vehicles with cruise control

*2 - Refer to applicable transmission wiring diagram

*3 - Refer to applicable wiring diagram for automatic transmission

Previous Diagram 3/7 (Tracks 71-84)

Next Diagram 3/9 (Tracks 99-112)