Automatically Shifted Manual Transmission/Transaxle: Locations

Component Locations: Transmission Systems

7-Speed Automatic Transmission 0B5 - Transmission Control Module,Sensors and Pressure Regulating Valves



DSG transmission Mechatronic -J743-






• The DSG transmission Mechatronic is attached to the transmission housing
at the bottom and covered by the transmission fluid pan.

• The Mechatronic unit incorporates the hydraulic control, the Transmission control module -J217- , the multifunction transmission range
switch and the sensors and actuators as a complete synchronized unit.


Gear Selector, Mechatronic Temperature
Sensor






1 - Circuit board 1
2 - Gear selector module
3 - Gear position distance sensor 1 -G487- for gear selector 2-R
4 - Gear position distance sensor 2 -G488- for gear selector 1-3
5 - Gear position distance sensor 3 -G489- for gear selector 7-5
6 - Gear position distance sensor 4 -G490- for gear selector 4-6
7 - Clutch oil temperature sensor -G509-
8 - Transmission input speed sensor 3 -G641-
9 - Circuit board 2
10 - Electro-hydraulic control module

Mechatronic Connectors and Sensor
Module






1 - Circuit board connector 1 on the transmission control module
2 - Circuit board connector 2 on the transmission control module
3 - Circuit board 2
4 - Sensor module connector at the wiring harness
5 - Drive position sensor -G676-
6 - Circuit board 3 in the sensor module
7 - Transmission input speed sensor 1 -G632-
8 - Transmission input speed sensor 2 -G612-
9 - Wiring harness with wiring channel
10 - Transmission control module to vehicle wiring harness
11 - Transmission control module at the sensor module
12 - Transmission control module
The following items are also Integrated into the Mechatronic Module:
• Sub-transmission 1 valve 1 -N433- , Sub-transmission 1 valve 2 -N434- , Sub-transmission 1 valve 3 -N435- , Sub-transmission 1 valve 4 -N436- , Sub-transmission 2 valve 1 -N437- , Sub-transmission 2 valve 2 -N438- , Sub-transmission 2 valve 3 -N439- , Sub-transmission 2 valve 4 -N440- , Cooling oil valve -N471- and Main pressure valve -N472- .

• Temperature sensor in control module -G510- , Automatic transmission hydraulic pressure sensor 1 -G193- and Automatic transmission hydraulic pressure sensor 2 -G194- .


Sensor Module, with Integrated Transmitters and
Sensors -G612-, -G632-, -G676- and Circuit Board 3






The sensor module -2- is installed in the transmission intermediate
housing
The following components are integrated on the sensor module:
• Drive position sensor

• Transmission Input Speed Sensor 1

• Transmission Input Speed Sensor 2

• Circuit board 3


Selector lever sensor system control module -J587-






The selector lever sensor system control module -2- is clipped to
the gearshift mechanism function unit -arrows-.

Transmission fluid temperature sensor 2 -G754-






Depending on the date of manufacture, there are 2 different versions
and component locations, either on the side or in place of the transmission
fluid drain plug (Manual Transmission Fluid).

Selector lever transmission range position display unit -Y26-






The selector lever transmission range position display unit -1- is
clipped inside the Multimedia system control head -E380- .