Diagram 1/33 (Tracks 435-448)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Brake lamp switch, Comfort system central control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F - Brake lamp switch Locations

G476 - Clutch position sensor

J217 - Transmission control module Locations Locations

J393 - Comfort system central control module Locations

J623 - Engine control module Locations

ST3 - Fuse panel 3

SB3 - Fuse 3 (on fuse panel B) Overview Of Fuses

T4ak - 4-pin connector

T17a - 17-pin connector, Left plenum chamber E-box connector station Locations

T17b - 17-pin connector, Left plenum chamber E-box connector station Locations

T17i - 17-pin connector, in the left A-pillar connector station Locations

T17o - 17-pin connector, in the connector station, right A-pillar Locations

T32g - 32-pin connector Locations

(B335) - Connection 1 (54) (in main wiring harness)

(D217) - Selector lever P/N position connection (in main wiring harness)

(E26) - Selector lever P/N position connection (in Motronic multiform fuel injection wiring harness)

* - Refer to applicable wiring diagram for fuse positions

*2 - Refer to applicable engine wiring diagram

*3 - Only for vehicles with automatic transmission

*4 - Refer to applicable wiring diagram for automatic transmission

*5 - Only for vehicles with a manual transmission

Previous Diagram 1/32 (Tracks 421-434)

Next Diagram 1/34 (Tracks 449-462)