Cowl

Cowl

Removing






- Remove plenum chamber cover. Refer to => [ Plenum Chamber Cover ] Plenum Chamber Cover.

- Remove the clamp - 1 - - arrow A -.

Danger of causing damage to the wind cowl.

• Coat the transition between the windshield and the cowl panel with a soapy solution.

- Remove the cowl panel - 2 - from the retainer - 4 - on the windshield - 3 - vertically upward - arrows B - starting on the edge of the glass.

Installation

Installation is reverse of removal, but note the following:

• Be careful not to damage the cowl panel otherwise water can get into the air conditioner via the air intake shroud.

• The plenum chamber cover cowl panel must lock completely into the windshield frame.

- Install the plenum chamber cover. Refer to => [ Plenum Chamber Cover ] Plenum Chamber Cover.