Plenum Chamber Cover

Plenum Chamber Cover

Removing






- Remove the seal - 7 -.

- Lift the plenum chamber cover - 3 - far enough so that the frame - 4 - is above the air intake shroud - 5 - for the fresh air blower.

- Remove the plenum chamber cover from the cowl panel - 6 -.

• The tab - 2 - over the cover - 1 - will get damaged if the seal is not removed.

Installation






Installation is reverse of removal, but note the following:

• Be careful not to damage the plenum chamber cover - 2 - and the plenum chamber cover with frame - 5 - for the air intake shroud - 4 - to prevent water from getting into the air conditioner when the plenum chamber cover is installed - 1 -.

• The plenum chamber cover cowl panel must lock completely into the windshield frame - 3 -.

• The plenum chamber cover must be installed correctly and completely into the mount - arrow - for cowl panel.