Backrest Blower Fan V388/V389

Backrest Blower Fan V388/V389

Driver seat backrest blower fan (V388) / front passenger seat backrest blower fan (V389)

Removing






- Remove the backrest cover. Refer to => [ Backrest Cover ] Backrest Cover.

- Disconnect and free up the electrical connector - 2 -.

- Spray the rubber protrusions - arrows - of the elastic blower fan mount - 1 - with silicon-free lubricating spray.

- Detach blower fan from the rubber protrusions and remove it.

Installation

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Front Multicontour Seat Control Module, Lumbar Support air Cushion Module Carrier and Backrest Fan Assembly Overview ] Front Multicontour Seat Control Module, Lumbar Support Air Cushion Module Carrier and Backrest Fan Assembly Overview.