Backrest Assembly Overview

Backrest Assembly Overview






1 Seat pan

2 Bolt

• Quantity: 2

• self-locking

• Replacing

• Threaded holes for screws must be cleaned, for example, with thread cutter

• 34.5 Nm

3 Backrest

• Removing and Installing, refer to => [ Backrest ] Backrest

4 Headrest

• Removing and Installing, refer to => [ Headrest ] Headrest

5 Backrest cover

• If equipped cargo net: the cargo net cannot be separated from the backrest cover.

• Removing and Installing, refer to => [ Backrest Cover ] Backrest Cover

• Attach to the top of the backrest frame and then press on it until it audibly locks

6 Bolt

• Quantity: 2

• self-locking

• Replacing

• Threaded holes for screws must be cleaned, for example, with thread cutter

• 34.5 Nm

7 Electrical wiring harness

• From the side airbag to the connector station

• Depending on optional equipment, there may be more wiring harnesses, such as for the backrest heating, lumbar support