Headrest

Headrest

• The headrests can be removed with the front seats installed.

Removing






- Move the front seat forward into the lowest position and tilt backrests approximately 45°.

Vehicles with basic seats:

• The release button is located on the outer left of the driver seat and inner left of the passenger seat.

- Search for release button pressure point - 2 - under the seat cover.

• The release button is approximately 35 mm below the upper edge of the backrest.

- Press release button - arrow - and simultaneously pull out headrest - 1 -.

Vehicles with Comfort seats:






• The release button is located on the left and right headrest guide.

- Search for release button pressure point - 2 - under the seat cover.

• The release button is approximately 35 mm below the upper edge of the backrest.

- Pull on both sides of the headrest - 1 - and remove it from the headrest guide.

- Press the release button - arrow - and remove the headrest at the same time.

Installation

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Headrest Assembly Overview ] Headrest Assembly Overview.