Rear Bracket For Sill Panel Trim

Rear Bracket for Sill Panel Trim

Removing






- Remove the sill panel trim. Refer to => [ Sill Panel Cover ] Sill Panel Cover.

- Release the tabs - arrows - with a narrow screwdriver - 2 - and remove the rear bracket - 1 - toward the outside at the same time.

- Remove the rear bracket for the sill panel trim.

Installing

Installation is reverse of removal, but note the following:

- Press on the rear bracket until it clicks into place.

- Install the sill panel trim. Refer to => [ Sill Panel Cover ] Sill Panel Cover.