Left Flange Shaft Seal

Left Flange Shaft Seal

Special tools, testers and auxiliary items required

• Thrust piece (3305)

• Pulling Hooks (T20143/2)

• Grease, refer to the electronic parts catalog ETKA

Procedure

• The sealing ring can be replaced with transmission still installed.

• => [ Repair Information ] Repair Information.

• => [ Clean Working Conditions ] Clean Working Conditions.

- Remove the left flange shaft. Refer to => [ Left Flange Shaft ] Left Flange Shaft.

- Pull out flange shaft seal using (T20143/2).





- Lightly oil outer circumference of new shaft seal.

- Fill the space between the sealing and dust lip - arrow - half way with sealing grease; sealing grease, refer to the electronic parts catalog ETKA.





- Install the new shaft seal using the (3305). Be careful not to tilt it.





- Install the left flange shaft. Refer to => [ Left Flange Shaft ] Left Flange Shaft.

- => [ Transmission Fluid, Checking and Filling ] Transmission Fluid, Checking and Filling.