Left Flange Shaft

Left Flange Shaft

Special tools, testers and auxiliary items required

• Oil Collecting and Extracting Device (V.A.G 1782)

Removing

• => [ Repair Information ] Repair Information.

• => [ Clean Working Conditions ] Clean Working Conditions.

- Remove left drive axle.

- Place the (V.A.G 1782) under the transmission.

- Remove left flange shaft countersunk bolt by installing 2 bolts in flange and counter holding flange shaft with assembly lever.





- Remove the flange shaft with the pressure spring, the thrust washer and the tapered ring.

Installation

Install in reverse order, paying attention to the following:

• Tightening specifications, refer to => [ Seals and Flange Shafts Overview ] Seals and Flange Shafts Overview.

• Replace flange shaft countersunk bolt.

- Press in the flange shaft and secure it with a new bolt.

- Install the drive axle.

- => [ Transmission Fluid, Checking and Filling ] Transmission Fluid, Checking and Filling.