Sealing Flange, Ribbed Belt Side Assembly Overview

Sealing Flange, Ribbed Belt Side Assembly Overview






1 Bolt

• Tightening specifications - 25 - => [ Bolt ] Toothed Belt Assembly Overview

2 Crank Shafts - Toothed Belt Gear

• There must be no oil on the contact surface between the toothed belt sprocket and crankshaft

• Only possible to install in one position

3 Crankshaft Shaft Seal, Belt Pulley Side

• Replacing, refer to => [ Crankshaft Shaft Seal, Belt Pulley Side, Replacing ] Service and Repair.

• Do not oil

4 Sealing Flange (belt pulley side)

• Must be located on alignment pins

• Removing and installing, refer to => [ Sealing Flange, Belt Pulley Side ] Service and Repair

5 Cylinder Block

6 Fitting Pin

• 2 pieces

7 Bolt

• Tightening specification and sequence

Ribbed Belt Pulley Side Sealing Flange - Tightening Specifications and Sequence