Shift Cable: Description and Operation

Selector Lever Cable Overview






1 Bolt

• 13 Nm

• For selector lever cable adjustment

• Secured on the shift mechanism function unit

2 O-ring

• Removing and installing

3 Clip

• For selector lever cable to selector mechanism function unit

4 Bolt

• 8 Nm

• Quantity: 2

5 Selector Lever Cable Bracket

6 Clip

• For connecting the selector lever cable to the selector lever cable bracket

7 Selector Lever Cable

• Do not bend

• Refer to => [ Selector Lever Cable ] Removal and Replacement

• The selector lever cable must be replaced if the rubber grommet is damaged.

• Lightly lubricate ball socket with polycarbamide grease (G 052 142 A2) before installing.

• Make sure the rubber grommet on the transmission side is not twisted when installing.

• Refer to => [ Selector Lever cable, Adjusting ] Adjustments

8 Gearshift Lever