Retaining Bracket Trim, Sill Side

Retaining Bracket Trim, Sill Side

Removing






- Remove tunnel side trim panel:

• Standard seat and Sport seat (manual). Refer to => [ Trim, Sill Side ] Trim, Sill Side.

• Front Folding Seat, Passenger Seat. Refer to => [ Trim, Sill Side ] Trim, Sill Side.

- Remove the screw - 1 -, if applicable.

- Remove the screws - 2 - and remove the bracket - 3 - from the front seat.

Installation

To install, perform the steps used in removal in reverse order.

Tightening specifications, refer to => [ Sill Side Trim Retaining Bracket Overview ] Sill Side Trim Retaining Bracket Overview.