Pedal Assembly Component Overview
Pedal Assembly Component Overview
1 Mounting bracket
• Removing and installing, refer to => [ Clutch Master Cylinder ] Service and Repair
2 Mounting pin for clutch and brake pedal
3 Locking clip
4 Internal hex bolt - 25 Nm
5 Brake pedal
• Maintenance-free bearing; do not lubricate
6 Clutch Pedal Switch (F 36)
• May be installed just one time; must be replaced when removed
• Removing and installing, refer to => [ Clutch Pedal Switch ] Clutch Pedal Switch
7 Internal hex bolt - 5 Nm
• To secure mounting pin for clutch pedal and brake pedal
8 Clutch pedal
• Removing and installing, refer to => [ Clutch Master Cylinder ] Service and Repair
9 Circlip
10 Base block
• Removing and installing => [ (Item 9) Base block ] Removal and Replacement
11 Internal hex bolt - 20 Nm
12 Clutch master cylinder
• Removing and installing, refer to => [ Clutch Master Cylinder ] Service and Repair
• Gasket - arrow - must not be removed
13 Over-center spring
• Black side faces toward clutch pedal
• Removing and installing, refer to => [ Over-Center Spring ] Over-Center Spring
14 Clutch Pedal Starter Interlock Switch (F194)
• Vehicles with 3.2L FSI engine
• Vehicle can only be started with clutch fully depressed ( Clutch Pedal Starter Interlock Switch).
• May be installed just one time; must be replaced when removed
• Removing and installing, refer to => [ Clutch Pedal Starter Interlock Switch ] Clutch Pedal Starter Interlock Switch
15 Torx(R) bolt - 25 Nm
• For securing master brake cylinder/brake booster on mounting bracket