Radiator, Replacing

Radiator, replacing

Note! Since the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the essential information in the illustrations is always correct.

Removal

Removing the engine cooling fan (FC)
Remove the electric cooling fan. See Engine cooling fan (FC), replacing Service and Repair.

Draining coolant
Block lower hose with lock grip pliers.
Install a hose on the nipple at the radiator.
Feed the hose down to a container.
Open the nipple and drain off the coolant.

Removing the radiator





Remove:
- the evacuation hose from the expansion tank
- the 4 bolts





Remove:
- the 2 mounting bolts
- the radiator.

Installation

Installing the radiator




Lift the radiator. Install the two M8 mounting bolts.

Note! Make sure that the radiator is positioned correctly in the guide pins on top of the unit.

Note! Make sure that no hoses are trapped when installing the radiator.





Install:
- the evacuation hose from the expansion tank
- the 4 x M6 screws.

Installing the engine cooling fan (FC)
Install the electric cooling fan. See: Engine cooling fan (FC), replacing Service and Repair.