Seal, Drive Shaft, Replacing

Seal, drive shaft, replacing

Special tools:
999 1801 STANDARD SHAFT 999 1801 Standard Shaft
999 5541 PUNCH 999 5541 Punch

Left-hand side

Preparatory removal
See.

Remove the drive shaft seal




Use a jimmy bar with a flat surface. Turn the flat surface towards the transmission housing.

Install the drive shaft seal





Note! Clean thoroughly before installing the new seal

Apply a small amount of grease to the sealing lip.
Use drift 999 5541 PUNCH 999 5541 Punch and shaft 999 1801 STANDARD SHAFT 999 1801 Standard Shaft.
Place the side of the drift marked M56 against the drive shaft seal.

Install the drive shaft in the transmission
See Drive shaft left, replacing, B5254T2, M56 Service and Repair

Right-hand side

Preparations
See Drive shaft left, replacing, B5254T2, M56 Service and Repair and Drive shaft right, replacing Drive Shaft Right, Replacing

Remove the drive shaft seal




Use a jimmy bar with a flat surface. Turn the flat surface towards the transmission housing.

Install the drive shaft seal





Note! Clean thoroughly before installing the new seal

Apply a small amount of grease to the sealing lip.
Use drift 999 5541 PUNCH 999 5541 Punch and shaft 999 1801 STANDARD SHAFT 999 1801 Standard Shaft.
Place the side of the drift marked M56 against the drive shaft seal.

Install the right drive shaft in the transmission
See Drive shaft right, replacing Drive Shaft Right, Replacing
See, Drive shaft left, replacing, B5254T2, M56 Service and Repair , Drive shaft left, replacing, B5254T2, M56 Service and Repair and Drive shaft left, replacing, B5254T2, M56 Service and Repair