Faulty Wheel Alignment or Steering Wheel Angle

Faulty wheel alignment or steering wheel angle

Checking the steering wheel angle




- Ignition on
- Read off the steering wheel angle.
Check the front wheel alignment and that the steering wheel is in the straight ahead position. The front suspension must be adjusted and DSTC calibrated if the front wheel alignment and the steering wheel position do not correspond.

Other information:
- To connect the breakout box, see Connecting the ABS/DSTC breakout box Pinout Values and Diagnostic Parameters
- To disconnect the steering wheel angle sensor, see Contact reel / steering wheel angle sensor, replacing Contact Reel / Steering Wheel Angle Sensor, Replacing
- To adjust the front end, see Wheel alignment, checking / adjusting Wheel Alignment, Checking/Adjusting
- For information about signals, see Signal specification, ABS / DSTC (dynamic stability and traction control) control module Signal Specification.









Does the ABS system need calibrating?

Yes - Checking the connectors

No - DONE

-------------------------------------------------

Checking the connectors




- Ignition on
- Calibrate the ABS system.










Continue - Fault Found

-------------------------------------------------