Internal Fault. Intermittent Fault

Internal fault. Intermittent fault

STC or DSTC




Question

Question

Does the car have a DSTC system?

Yes - DSTC

No - STC

------------------------

STC - Intermittent fault

DSTC - DSTC

-------------------------------------------------

Intermittent fault
Check the wiring between the battery positive terminal and anti-lock brake system module (ABS) terminal #9. Check for an intermittent open-circuit. See Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.

Other information:
- To connect the breakout box, see Connecting the ABS breakout box Pinout Values and Diagnostic Parameters
- To disconnect the ABS control module connector, see Control module (ABS), replacing Brake Control Module (BCM), Replacing
- For other values, see Signal specification, ABS control module Signal Specification.










Continue - DONEFault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - Fault Found

------------------------

DONE - DONE

FAULT FOUND - Fault Found

Attempt New Test - Intermittent fault

-------------------------------------------------

DSTC





Internal fault. Intermittent fault

Intermittent fault
Check the wiring between the battery positive terminal and transmission control module (TCM) terminal #16 for an intermittent open-circuit according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.

Other information:
- To connect the breakout box, see Connecting the ABS/DSTC breakout box Pinout Values and Diagnostic Parameters.
- To disconnect the ABS control module connector, see Replacing ABS / DSTC (dynamic stability and traction control) control module Replacing ABS / DSTC (Dynamic Stability and Traction Control) Control Module.
- For other values, see Signal specification, ABS / DSTC (dynamic stability and traction control) control module Signal Specification.










Continue - DONE Fault-tracing information

------------------------

Fault-tracing information
Information
DONE - DONE

FAULT FOUND - Fault Found

Attempt New Test - Intermittent fault

------------------------

FAULT FOUND - Fault Found

DONE - DONE

-------------------------------------------------